Brief introduction of Zinc Sulfide

If you are looking for high-quality products, please feel free to contact us and send an inquiry, email:

What Zinc Sulfide is? A white, off-white, or yellow powder of zinc sulfide. Zinc sulfide turns darker when exposed light is applied. Zinc sulfuride is stable in dry atmosphere. It will slowly oxidize to zinc sulfurate if left in humid conditions for too long. Zinc sulfuride is easily soluble and soluble with dilute inorganic acid. However, it is not soluble when dissolved in water. Its relative densities are 3.98 (a kind), 4.102(b type), and d25 (b kind).
Is Zinc Sulfide fluorescent, or phosphorescent?

Zinc sulfuride is one of most commonly used phosphorescent substances. A special type of photoluminescence is phosphorescence. Phosphorescent materials emit absorbed energy at the same time as fluorescent substances.

What are some properties of zinc sulfuride?

Zinc sulfuride is a white, or slightly yellow powder. It forms crystals in the presence of H2S gas. Its alpha form is a hexagonal colorless crystal with a density 3.99g/cm3 melting point at 1700degC. Its beta version is a cubic colorless crystal with a density o 4.102g/cm3. At 1020degC, it transforms into an alpha form. Zinc sulfide can be found in sphalerite. Insoluble when water is used. Soluble in acid. You can see the sun dimmed.

Zinc sulfuride can be transformed into zinc sulfide in humid conditions for a very long time. It is generally formed from the interaction of hydrogen sulfide with zinc salt solution. A small amount of Cu Mn, Ag can be added to activate the crystalline ZnS. It will emit different colors of fluorescence when illuminated. Zinc sulfuride can be used to make coatings or analytical reagents. It can also be used to create paint, opaque glass and rubber as well as plastic and phosphor.

Is zinc sulfide FCC or BCC?
Zincblende/sphalerite is based on an FCC lattice of anions whereas wurtzite is derived from an hcp array of anions. The cations are found in both structures and occupy one type of tetrahedral hole.
How to make zinc sulfide.

Method 1: Add ammonium to the zinc salt solution. You will get a white precipitate.

Method 2: Add ammonium to the zinc sulfate, and then pass in hydrogen to cause precipitation. After the precipitate has been filtered, it is dried in an isolation room. This will give you a clear white crystal zinc sulfide.

Why does zinc sulfide glow?

The color additive luminescent sulfide, which is zinc sulfur with a copper activator, is zinc sulfide. Lumenescent zinc sulfide emits a yellow-green color when it is excited by daylight or an artificial light. It can produce a maximum of 530 nanometers of phosphorescence.

Zinc Oxide Supply

(aka. Technology Co. Ltd. (aka. Our company has developed a number of materials. Our company produces zinc sulfide of high purity and excellent quality. To contact us, send an email or click the requested products link.