Molybdenum Silicide MoSi2 Powder CAS 12136-78-6

 About Molybdenum Silicide MoSi2 Powder: MoSi2 is an intermetallic compound, molybdenum silicide is a refractory ceramic, mainly used for heating elements. It has a medium-density, a melting point of 2030 ° C, which is electrically conductive. At high temperatures, it forms a passivation layer of silica to protect it from further oxidation. The thermal stability of MoSi2 and the thermal stability…

Cobalt Silicide CoSi2 Powder CAS 12017-12-8

About Cobalt Silicide CoSi2 Powder:Cobalt Silicide is an intermetallic compound, a silicate of cobalt. It is a superconductor with a Ca transition temperature. Cobalt disilicide, chemical formula CoSi2.Molecular weight 115.11.Dark brown rhombic crystal.Melting point 1277℃, relative density 5.3. It can be oxidized at 1200℃ to erode its surface; Reacts with fluorine at low temperatures, and…

Chromium Silicide CrSi2 Powder CAS 12018-09-6

About Chromium Silicide CrSi2 Powder:Silicide chromium is an inorganic compound that is chemically formula CrSi2. Silicide is a gray cubic crystal, six-square crystal system. The melting point is close to 1550 ° C, and the bond form in the crystal is similar to CR3Si, with metal gloss. CrSi2 is dissolved in hydrochloric acid and royal water….

Titanium Silicide TiSi2 Powder CAS 12039-83-7

About Titanium Silicide TiSi2 Powder:With the rapid development of large integrated circuits (ULSI), the size of the equipment and equipment is getting smaller, the requirements for equipment size, film quality, and thickness uniformity are getting higher.At present, the wire width of the semiconductor device has been reduced to less than 0.1 μm, so it is impossible to…

Tantalum Silicide TaSi2 Powder CAS 12039-79-1

About Tantalum Silicide TaSi2 Powder:Tantalum silicide TaSi2 powder is with uniform particle size, structural stability. Tantalum silicide has excellent properties such as high melting point, low resistivity, corrosion resistance, high-temperature oxidation resistance, and good compatibility with silicon, carbon and other matrix materials. Tantalum silicide TaSi2 powder is used as the gate material, integrated circuit connection line,…

Copper Silicide Cu5Si Powder CAS 12159-07-8

About Copper Silicide Cu5Si Powder:Copper silicide (Cu5Si), also known as Penta-copper silicide, is a binary compound of silicon and copper. It is an intermetallic compound, which means that its properties lie between those of an ionic compound and an alloy. This solid crystalline material is a silvery solid insoluble in water. Bettyshoe is a trusted global…

Calcium Nitride Ca3N2 Powder CAS 12013-82-0

About Calcium Nitride Ca3N2 powderIn most cases, calcium nitride is usually available in large volumes. Bettyshoe provides a wide range of products for hydrogen storage research, advanced fuel cells, and battery applications. Hydrogen is easily produced from renewable energy sources and is the most abundant element in the universe. Hydrogen comes from many sources, such…

Iron Disilicide FeSi2 Powder CAS 12022-99-0

About Iron Disilicide FeSi2 Powder:Iron Disilicide with the chemical form for FeSi2, is an intermetallic compound, is a kind of silicified Iron, in the form of rare mineral Linzhiite exists in nature. At room temperature, it forms a rhombic crystal (β phase), which transforms to a tetragonal α phase when heated to 970℃. Iron Disilicide is…

Magnesium Silicide Mg2Si Powder CAS 22831-39-6

About Magnesium Silicide Mg2Si Powder:Magnesium silicide is an inorganic compound composed of magnesium and silicon, and the chemical formula is Mg2Si, and the molecular weight is 76.71. Cyan or light purple powder, cubic crystal. The melting point is 1102 ° C, the relative density 1.94.Magnesium silicide is insoluble in cold water and decomposes in hot water….

Titanium Silicide Ti5Si3 Powder CAS 12067-57-1

About Titanium Silicide Ti5Si3 Powder:Ti5Si3 has good high-temperature stability, high-temperature strength and good oxidation resistance, and is expected to be used in high temperature structural materials above 1300℃.In addition, because of its low electrical resistance and thermal resistance, Ti5Si3 is also promising for electrical connection structures and diffusion barrier layers.Ti5Si3 powder can be prepared by weighing…